M-AUDIO Black Box - Manual (Page 12)

English
Black Box Quick Start Guide • 11
FRONT PANEL CONNECTORS
< Plug your headphones into the jack with the headphone icon.
< Plug your guitar into the Guitar Input jack.
REAR PANEL CONNECTORS
< Plug a dynamic microphone into the Mic input.
< Use the Balanced Outputs to connect to powered speakers or an analog mixer.
< Use a 75-Ohm S/PDIF cable to record from the S/PDIF digital output.
< Connect an expression pedal, like the M-Audio EX-P, to the Expression pedal jack to control
functions like wah effects.
< Connect momentary pedals, like the M-Audio SP-1, to the P1 and/or P2 jacks to control functions
like Start/Stop, etc.
< Connect the USB connection on the Black Box to your computer with the included USB cable.
< Only use the 9V AC 1000mA power supply included in the package. Using an improper power
supply can damage your unit.
IF YOU CANNOT HEAR SOUND:
< Be sure your Input/Playback knob is set appropriately and that your output level knob is turned up.
Also make sure that you are plugged into the proper input jack and the input level knob is turned
up.
< If you can hear drums but not guitar—or you can hear guitar but not drums—check the GTR/DRM
BAL parameter in the Utility menu. A setting of P50 will only provide guitar sound. A setting of D50
will only provide drum sounds. Any setting in between will play a little of both. A middle setting
of EQU means that the output of the drums is equal in volume to the output of the guitar effect. A
setting of SEP means the drum signal will come out of one output, while the guitar effect signal will
come out of the other.