Toner Cable Soloist-HD Pro Broadcast Decoder - Manual

Soloist-HD Pro
Broadcast Decoder
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The Soloist-HD Pro is a broadcast quality High
Definition MPEG 2 and AVC decoder. Multi-
CODEC decoding has never been easier or
more reliable. The Soloist-HD Pro supports
GIGE and Hard Drive Transport Stream
decoding. Video outputs include D1
(composite), HDMI with HDCP and
HD-SDI with embedded audio. Decode
MPEG 2 SD 422, HD 420, AVC SD and HD
video. Audio decoding includes a single stereo channel of Dolby
Digital, Dolby 5.1*, MPEG 1 Layer 2 and AAC-LC audio. Output broadcast quality video with
embedded stereo audio on the HD-SDI interface and to consumer monitors with the HDMI interface. Composite D1
video and balanced analog audio are also supported for legacy NTSC or PAL environments. The decoder can down
convert HD 1080i or 720 P to Composite or SDI.
Benefits
• Decode MPEG-2 and AVC High Definition: Step up
to stunning high defi nition decoding of AVC/H.264
and MPEG-2.
• GIGE Decode: Use the included GIGE interface to
decode a live transport stream.
• Up and Down Conversion: Scale video up or down
from NTSC to 1080i60.
• Hard Drive Decode: The Soloist-HD Pro includes a
built in hard drive with a command interface and
scheduler that can play a list or scheduled transport
streams.
• Automatic Fallback with Signal Loss: The Soloist-
HD Pro will fall back to hard-drive playout if a signal
is lost.
• High and Standard Definition: Decode both SD and
HD content with the Soloist-HD Pro.
• Sound Professional: Decode stereo MPEG 1 Layer
2, Dolby Digital and decode or down-mix Dolby 5.1.