Toner Cable PONA 2100 Series Erbium Doped Fiber Amplifier - Manual

The EMCORE PONA 2100 Series Erbium Doped Fiber Amplifier
(EDFA) is an ideal building block for OEM system integrators. The fam-
ily of PONA 2100 series EDFA’s is designed to meet the most demand-
ing noise performance requirements of CATV applications, and per-
forms all the functions required of an optical amplifier for system inte-
gration. Packaged in a convenient 1 RU housing, the PONA 2100
series EDFA’s provide optical isolation on the input and output of the
gain block for stable, low noise operation. The input and output optical
signal power levels are detected for monitoring and control. The input
optical signal is amplified with active gain control for a constant output
power level, or with active output power control for constant gain
mode. The PONA 2100 series EDFA’s also provide monitors and asso-
ciated alarms for all vital characteristics. The optical output of the
PONA 2100 series EDFA’s can be split into multiple ports by an option-
al external splitter.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
APPLICATIONS
• High Performance Supertrunking Links
• High Power Distribution Networks
• Redundant Ring Architectures
• FTTx Networks
FEATURES
• Full Functionality 1 RU EDFA
• Low Noise Figure (Typ < 5.5dB )
• Total Input Power Range: –10 dBm to +12 dBm
• +14 dBm to +30 dBm Output Power
• Optional Internal Optical Power Splitters
• Standard RS-232 Communication
• Key Lock Switch
• Standard and Optional Gain Flatness (1530nm -
1562nm)
• VFD Panel Status Indicator
• Low Electrical Power Consumption
• Input / Output Isolation > 40/40 dB
• Polarization Dependant Gain < 0.1 dB
• Polarization Mode Dispersion < 0.5 ps
PONA 2100 Series
Erbium Doped Fiber Amplifier
Ordering Information
Notes:
1) PONA 2130 with one or two optical outputs and PONA 2127 with one optical output will have special high power output optical
connector(s) and bulkheads.
2) For ordering PONA preamplifiers please contact your Sales Representative
3) Only some models can be ordered with Gain Flattened and/or Low NF options. (-01, -02, and –03 suffixes). Please contact your
Sales Representative for details.