Toner Cable OTMN-II Metronode 4-Output FTTC Optical Node User Manual
Otmn-ii
OTMN-II
MetroNode 4-Output Compact, Modular, Scaleable Fiber Deep
FTTC Optical Node
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: 215-675-2053 Fax: 215-675-7543
l
The OLSON TECHNOLOGY, INC. MetroNode Model OTMN-II
is a high performance, four output CATV optical node, offering
the capability of greater than +50dBmV output levels. This
node benefits the system operator by extending overall path
length, maximizing equipment usage and reducing the number
of network elements. Full RF output can be maintained with an
optical input as low as -4dBm. With system performance to
870MHz (or optional 1GHz), the MetroNode OTMN-II provides
the ideal platform for support of the evolving technologies and
services in today’s advanced HFC and PON networks.
MetroNode OTMN-II offers protection configurations which are
ideal for critical analog and digital transmission, telephony and
data services. Utilizing extensive modular design with easy in-
field replacement, the MetroNode OTMN-II can meet any
advanced broadband network requirement.
Features
•
Flagship Model of the OT “Metro Node” family.
Field-Proven, 1000’s deployed worldwide
•
High Performance, High Output, Economical, Low
Power Dissipation, Two-Way Capable
•
Advanced GaAs device technology provides
Excellent RF Performance to 870MHz or optional
1GHz
•
Quad RF Amplifier Module provides Four (4)
+50dBmV high level RF Output Ports
•
Interstage Slope and RF Input/Output controlled via
internal Plug-in EQs and Plug-in attenuator Pads
•
Choice of frequency Diplexer splits: 42/54 MHz -or-
65/85 MHz for NTSC, PAL & CENELEC use
•
+50dBmV High RF Output Levels maintained over
Wide Optical Input Range: +3dBm to -4dBm
•
Multiple Redundancy & Segmentation
Configurations via dual Receiver &/or dual
Transmitter Options
•
Choice of FP, DFB & CWDM Return Lasers; High
Performance Return Path: >15dB over 41dB NPR
•
Power Factor Corrected Switching Power Supply
accepts 40-90VAC; Overvoltage Protection to
140VAC
•
Optional High Sensitivity Receiver (-8dBm to -
3dBm)
•
Optional Powering via 5th Dedicated AC Input Port;
No Power Inserter Required at the node
•
Optional use of 5th Power Port for Return Path
Output/Input
•
Optional NMS-Standard Status Monitoring &
Control module
•
Integrated User-Friendly Fiber Management Tray to
accommodate optical fiber and splices