Toner Cable XHC-12-1G 12 Port Headend Combiner - Manual

Specifications Subject To Change Without Notice Rev 02-12 ©Toner Cable Equipment, Inc.
XHC & LCC Series
Headend Combiners
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
XHC Series 8, 12 & 16 Way Headend Combiners
The Toner XHC Series combiners are full bandwidth 5 MHz to 1 GHz 8, 12, or 16 way combiner/splitters. They
may be used to combine the outputs of separate signal sources such as modulators and processors or it also can
be used to distribute the output of a phase lock generator or emergency alert system.
Model XHC-8-1G XHC-12-1G XHC-16-1G
Bandwidth 5-1000 MHz
Number of Inputs 8 12 16
Test Port 1 @ -20 dB
Flatness (10-1000 MHz) 1.5 dB 1.5 dB 2.0 dB
Impedance 75 ohms
F Ports 1/2” silver plated 3/8” - 32 UNEF
Insertion Loss (± 1.5 dB) 14.5 dB 17.5 dB 20 dB
Port to Port Isolation
5-800 MHz 40 dB typical, 36 dB minimum
800-1000 MHz 38 dB typical, 32 dB minimum
Input Return Loss 18 dB typ, 15 dB min 18 dB typ, 14 dB min 18 dB typ, 14 dB min
Output Return Loss 18 dB typ, 15 dB min 18 dB typ, 13 dB min 18 dB typ, 12 dB min
Dimensions 19 W x 3.5” D x 1.75” H (482 mm x 87 mm x 44 mm)
Weight 3 lb, 9 oz (1.47 kg)
SPECIFICATIONS
Frequency Range
5 MHz to 1 GHz
Flatness 3 dB 10 MHz to 1000 MHz
Inputs 12
Test Ports -20 dB
Output Ports 1
Isolation 34 dB typical (30 dB minimum)
Insertion Loss 17 dB typical (20 dB maximum)
Input Return Loss 15 dB typical (12 dB minimum)
Output Return Loss 15 dB typical (12 dB minimum)
Impedance 75 ohm
Size (LxWxD) 19 x 3 1/8” x 3/12
483 mm x 79 mm x 44 mm
Weight 3 lb-9 oz (1.47 kg)
The LCC-12-1G is a full bandwidth, 5 to 1000 MHz, 12 way combiner.
This unit features 12 F type inputs and 1 F type output on the back with
a -20 dB test point on the front for convenience.
LCC-12-1G Headend Combiner
SPECIFICATIONS