Toner Cable PONA 3000 Series Erbium Doped Fiber Amplifier - Manual

The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding noise
performance requirements of CATV and FTTx applications, and per-
forms all the functions required of an optical amplifier for system inte-
gration. Packaged in a convenient 2RU housing, the PONA 3000
series optical amplifiers provide optical isolation on the input and out-
put of the gain block for stable, low noise operation. The input and out-
put optical signal power levels are detected for monitoring and control.
The input optical signal is amplified with active gain control for a con-
stant output power level, or with active output power control for con-
stant gain mode. The PONA 3000 series optical amplifiers also provide
monitoring functions and associated alarms for all vital characteristics.
The optical output of the PONA 3000 series optical amplifiers can be
split into a number of ports by an optional internal splitter.
PONA3000 series includes AC/DC power supply, front panel, optical
splitters, network card and all necessary connectors.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
APPLICATIONS
• High Performance Supertrunking Links
• High Power Distribution Networks
• Fiber Deep Architectures
• FTTx Networks
FEATURES
• Full Function High Power Fiber Optic Amplifier
Ready for Integration
• Low Noise Figure (Typ < 6 dB)
• Total Input Power Range: –10 dBm to +12 dBm
• Total Output Power: +27 dBm to +35 dBm (Optical
Output Power Splitter is Optional For These Units)
• Standard RS-232 Communications
• Low Electrical Power Consumption
• Input / Output Isolation > 40/40 dB
• Polarization Dependant Gain < 0.1 dB
• Polarization Mode Dispersion < 0.5 ps
PONA 3000 Series
Erbium Doped Fiber Amplifier
Sample FTTx Architecture