Toner Cable PFAD900CS 806 MHz Agile Demodulator - Manual

Specifications Subject To Change Without Notice Rev 01-12 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
PFAD-900CS
Stereo Agile CATV A/V Demodulator
Features
• 125 Channel frequency range
54~806MHz (CATV 2~13, A1~A5, A-
ZZZ, 89~125, UHF 14~69)
• 60dB signal to noise ratio for crisp,
sharp picture
• Agile microprocessor control with push-
button channel selection provides ease
of installation, configuration and servic-
ing
• Digital display provides quick channel
identification
• SAW filtered for precise adjacent chan-
nel rejection
• Non-volatile memory ensures channel
programming remains after power loss
• Separate 4.5MHz sub-carrier and MPX
outputs for BTSC stereo applications
• 45.75MHz composite IF output allows
tuner monitoring, encoder, ghost can-
celing and video override applications
Input Frequency Range 54~806MHz
Tuning Agile
RF Input Level Range 0-25dBmV
Video Detection Type Envelope
Video Frequency Response ±1.5dB
Video Signal to Noise 60dB
Composite IF Output Level (min) 30dBmV
Audio Detection Type Quadrature FM
Audio Output Level (min) 800mV
Audio 4.5MHz Output Level (min) 35dBmV
Audio Frequency Response 20~15,000Hz
RF Input Connection 75Ω F-Female
Video Output Connection 75Ω F-Female
Audio Output Connection 600Ω RCA-Female Unbalanced
Audio 4.5MHz Output Connection 75Ω F-Female
Audio MPX Output Connection 600Ω RCA-Female
Voltage Input 115VAC
Power Output Receptacle Yes
Dimensions 19˝ (L) x 3˝ (D) x 1.75˝ (H)
Weight 3.8 lbs
Ordering Information
PFAD-900CS
Stereo Agile CATV A/V Demodulator
SPECIFICATIONS