Toner Cable TXMT-B Total Tap Blank Tap Plate - Manual

969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The Tap
Assembly
to Suit
Your Needs
The Total Tap is the only fully
modular, custom configurable
tap designed to serve from
2 to 48 subscribers.
By using the Total Tap,
You have
the ability to configure the tap
plates and values the way
You
need to, to service your customers
based on
Your system design.
No other tap in the industry gives
You this flexibility.
Total Tap Features
• Modular Assembly
• RF Bypass Circuitry
• Six Different Tap Locations
• Input From Both Ends
• Wide Spaced F Ports
• 2 to 48 Tap Ports
• Compact Design
• 2, 4, or 8 Port Tap Plates
• Equalization
• Ease of Installation
• -100dB RF Shielding
• Baked Acrylic Finish
• Stainless Steel Hardware
• 1 GHz Bandwidth
• Power Passing Housing
• US Patent # 6292371
The Total Tap is a completely new concept for the distribution of sig-
nal from one central location to up to 48 different locations (sub-
scribers).
The Total Tap features a precision die cast aluminum housing that has
six tap cavities for the installation of six plug in tap plates to provide
service for 2 to 48 locations (subscribers).
Each tap cavity can accept one of several types of 2, 4 or 8 port tap
plates or blank plates. With this combination of options available in
each of the six tap cavities, an almost unlimited range of configurations
is available.
The Total Tap housing has a 5/8” entry fitting at each end so the tap can
be used in several different configurations. The housing can be
fed from one end and use a terminating plate in the last position. The
housing can be fed from one end with the other end being an output.
Or, the housing can be fed from both ends using terminating plates
back to back.