Toner Cable C2200 DOCSIS 3.0 Cable Modem Termination System - Manual

C2200
(DOCSIS 3.0 Release)
Cable Modem Termination System
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Overview
The Casa Systems C2200 Cable Modem
Termination System (C2200) is a new class
of cable edge device that combines a third
generation DOCSIS CMTS and an MPEG
video Edge-QAM in a single compact 1RU
platform.
The broadband access over cable market
has experienced two generations of DOCSIS
CMTS. Most of the products on the market
today are either first generation CMTS or
second generation CMTS that can be char-
acterized by fixed downstream to upstream ratios, instantaneous bandwidth per subscriber limited to a
single RF channel, very low downstream channel density per rack unit, and high cost per unit bandwidth.
The legacy CMTS does not have any MPEG video processing capability and thus makes it necessary to
implement two parallel access networks for MPEG video and IP data. With those limitations, the legacy
CMTS is not economically viable in the new market of high bandwidth applications such as IPTV or IP
video delivery and is not competitive with other broadband access methods such as FTTX.
Features
• Full DOCSIS 3.0 qualified – Multi-channel DRFI RF
for Annex A, B, & C, downstream channel bonding up
to 16 channels, upstream channel bonding up to 16
channels, IPv6, AES encryption/decryption, multicast
QoS, bonded channel multicast, bonded S-CDMA
with multiple logic channels, full DOCSIS 3.0 MIBs,
and IPDR
• Separate Downstream and Upstream Modules –
Unlike traditional CMTS with fixed downstream to
upstream ratio, Casa CMTS has separate down-
stream modules and upstream modules that provide
flexible downstream to upstream ratio
• Integrated CMTS & Video QAM – DOCSIS traffic &
MPEG/DVB video traffic can share the same RF
channel
• Cost Effectiveness –The lowest cost per DOCSIS
channel in the industry. The only economical solution
for high bandwidth multimedia IP applications
• Software Licensing –Ability to activate additional
channels as needed up to the available physical
capacity of the module
• Superior Density – Offers the highest channel den-
sity in the industry, ranging from 48DSx16US for IP
video to 32DSx32US for typical broadband service
deployment in a single chassis
• Best Multi-channel RF performance – Exceeds
DOCSIS DRFI specification
• Extended Frequency Range – Downstream fre-
quency range up to 1GHz (48~1002MHz)
• DOCSIS 1.1 and 2.0 Features – Complete DOC-
SIS/EuroDOCSIS 1.1 and 2.0 feature sets
• Rich Operational Features – Rich operational fea-
tures such as show cable modem, flap list, spectral
management and IP bundling ready for deployment