Toner Cable SMFTK Fiber Test Kit - Manual

SMFTK
Fiber Test Kit
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The SMFTK Fiber Test Kit contains an OLS1315 optical light source with both 1310 and 1550 nm wave-
lengths, a -7 dBm output level and an SC/PC connector adapter. The kit also has an OPM1315 optical
power meter with an optical range of -50 to +26 dBm and has 850, 1310, 1490, 1550, and 1650 nm wave-
lengths for greater versatility. Included in the case are two, 1 meter SC/PC to SC/APC fiber jumpers and
an SC/APC mating sleeve for calibration and accurate test setup. Also included are two packs of lint free
fiber connector cleaning sticks.
Features
• 1310/1550 nm light source
• -7 dBm optical output level
• Compact handheld ergonomic design
• Auto shut off to conserve battery
• SC/PC optical adapter*
• 1310, 1440, 1550 & 1650 nm power meter
wavelengths
• -50 to +26 dBm optical test range
• Display resolution 0.01 dBm
• 9 volt battery powered
• 1 meter test cables with SC/APC mating
sleeve
• Rugged injection molded carrying case
• Standard test setup instructions
*Other adapters are available such as universal, FC, LC
& ST. AC power supplies are also available
The Toner SMFTK is a simple easy to use fiber test kit for
measuring the loss in singlemode fiber cable and couplers
and also to test the output level of fiber transmitters.