Toner Cable DSU Series 1GHz 80dB EMI MATV Power Passing Splitter - Manual

Specifications Subject To Change Without Notice Rev 11-11 ©Toner Cable Equipment, Inc.
DSU Series
1GHz 80dB EMI MATV Power Passing Splitter
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Features
• Broadband 5~1000MHz frequency range
• High-performance printed board circuitry provides improved hum modulation and intermodulation parameters
to ensure superior signal quality (DSU-P Series)
• Yellow-chromate plated zinc-alloy diecast housing ensures excellent ground bonding and long corrosion-free
service life in indoor/outdoor applications
• Epoxy-sealed back cover provides effective EMI-RFI shielding >-80dB, eliminating signal ingress to provide
distortion-free pictures
• 1-inch centered 3⁄8˝ long precision machined F-connector threads ensure improved port-to-connector inter-
face and accommodate external security devices
• High retention seizing pins provide improved connectivity to connector center lead
Ordering Information
DSU-2P 2-Port 1GHz Power Passing Splitter
DSU-3P 3-Port 1GHz Power Passing Splitter
DSU-4P 4-Port 1GHz Power Passing Splitter
DSU-8P 8-Port 1GHz Power Passing Splitter
MS-2D 2-Port 1GHz Power Passing Splitter
DSU-2P
DSU-3P
MS-2D
DSU-8P
DSU-4P
MHz DSU-2P DSU-3P DSU-4P DSU-8P Isolation Input/Output RFI
Insertion Loss Insertion Loss Insertion Loss Insertion Loss (min dB) Return Loss
(max dB) (max dB) (max dB) (max dB) (min dB)
5-400 3.6 3.7/7.2 7.2 11.0 20 18 >80 dB
400-500 3.8 3.9/7.5 7.5 11.0 24 18 >80 dB
470-600 4.0 3.9/7.5 7.5 12.0 23 18 >80 dB
600-1000 4.0 4.4/8.2 8.2 12.9 20 18 >80 dB
Specifications