Toner Cable OTPN-400C PremiseNode Receive Only Optical Node - Manual

OTPN-400C / OTPN-800C-H/L
PremiseNode Optical Node Receivers
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The Olson PremiseNode OTPN-400C Optical Node is a low-cost, compact, indoor
CATV receive-only node in a new cast housing. It is designed with the latest optical
receiver technology to reliably deliver a full slate of multiplexed video, data, and tele-
phony services in an HFC (hybrid fiber/coax) or PON (passive optical network) broad-
band CATV environment.
The Model OTPN-400C is ideal for direct fiber transmission of CATV RF signals in
FTTH, FTTx, MDU, corporate, government, educational, and other applications where
a high performance, compact indoor node is required. the unit is constructed with
high quality components to enable it to meet its performance specifications over a
wide temperature range in an uncontrolled environment, but it does require protection
from the elements. It is designed for desktop, shelf or wall-mounting.
The Model OTPN-400C offers good optical sensitivity, high RF output level, optical
indoor power DC test point and optical level LED indicator. The unit includes a provi-
sion for flexible powering of the node, either locally through the DC Power IN “+12V
DC
”
port, or remotely up the coax drop through the “RF OUT/+12V
DC
” port via an optional
Power Inserting Coupler (PIC).
The Model OTPN-400C is the perfect companion to the Olson Technology, Inc.
LaserLite and LaserPlus forward transmitter product families. It is also designed to
mate with 1310nm, 1550nm, CWDM and DWDM optical transmitters from most lead-
ing manufacturers.
Entry level member of the Olson
Technology’s PremiseNode family
offers high sensitivity, no frills, and
low cost.
• Receive only indoor optical node for
fiber-deep FTTX/PON CATV applica-
tions.
• Wide optical input window of 0 to -8dBm
at 1310/1550nm.
• High RF output range: +28dBmV @ -
1dBm optical input and +14dBmV@-8
dBm optical input.
• Full forward path bandwidth of 40-
1,000MHz with low noise and distortion.
• Calibrated DC test point for optical input
power (1V/mW).
• Tri-colored LED indicates optimal input
range and power on.
• +12 V
DC
for local or remote “up-the-coax”
powering via a Power Inserter Coupler
(PIC).
• 6kV surge tolerant RF output and SMT
construction for consistency, reliability,
and performance.
• Low power consumption.
• New compact, light-weight, rugged cast
aluminum housing for easy installation.
OTPN-400C PremiseNode Receive Only Optical Node