Toner Cable DRMM12 12 Module Rack Enclosure User Manual

Ps8 / drmm12 / drmm4, Modular rack enclosure & power supply, Specifications

Advertising
background image

Specifications Subject To Change Without Notice

Rev 05-12

©Toner Cable Equipment, Inc.

PS8 / DRMM12 / DRMM4

Modular Rack Enclosure & Power Supply

969 Horsham Road

l

Horsham, Pennsylvania 19044 USA

l

Phone: 215-675-2053 Fax: 215-675-7543

l

[email protected]

Power for up to eight of Drake Digital modules is provided by the
PS8 power supply.

In addition to the PS8 power supply, up to 12 Drake Digital modules
may be accommodated by the DRMM12 rack enclosure. The com-
pleted assembly occupies two rack units high in a standard 19 inch
rack.

The PS8 Power Supply supplies the +5 VDC & +12 VDC required
by the Digital Modules. Using appropriate, customer supplied
adapters, the PS8 will also power other DRAKE analog Mini-rack
System modules sharing the same rack. These include a demodula-
tor, both fixed and agile modulators and stereo modulation modules.

The DRMM4 Rack Enclosure with power supply is also available for
housing and powering up to four single width modules. Typically, this
rack is used with the DDC806 and DUC550 or DUC860 converters
to create a simple and inexpensive hetrodyne channel processor for
digital television signals.

General

PS8

DRMM4

Power Requirements:

100 – 240 VAC ±10%

100 – 240 VAC ±10%

Input Frequency:

50 – 60 Hz

50 – 60 Hz

AC Input Power:

80 Watts

30 Watts

Operating Temperature Range:

0 to +50°C

0 to +50°C

Internally Mounted Fan:

YES, 12 CFM (ft.³/min)

YES

Output Voltages:

+5VDC @ 4.75 Amps maximum

+5VDC @ 1.5 Amps maximum

+12 VDC @ 3.0 Amps maximum

+12 VDC @ 1.5 Amps maximum

Mechanical

Dimensions:

4.2" W x 3.5" H x 9.4" D

19" W x 1.75" H x 8.5" D

Weight:

2.6 lbs

2.8 lbs

Connectors

AC Input:

IEC., 6ft. USA AC power cord

USA AC power cord attached

supplied

DC Output:

Mini-Fit JR. x 8

Mini-Fit JR. x 4

Fuse (Internal, AC Input):

2A, 250 V, SLO-BLO, 5 x 20 mm

2A, 250 V, SLO-BLO, 5 x 20 mm.

Power supply assembly employs

Power supply assembly employs

short circuit and over-voltage

short circuit and over-voltage

protection.

protection.

Specifications

DRMM4 Rack Enclosure

DRMM12 Rack Enclosure

PS8 Front Panel

PS8 Rear Panel

Advertising