Toner Cable OT-1000-HH 1 GHz SuperMod 1550nm Optical Transmitter - Manual

OT-1000-HH
1 GHz SuperMod 1550nm Optical Transmitter
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The Olson Technology, Inc. LaserLite Model OT-1000-HH 1GHz SuperMod
(Direct Mod) 1550nm Optical Transmitter is a cost effective, high quality,
full-featured 1RU 19" optical transmitter. Designed for optical transport of
forward path analog, return path and digital QAM broadcast signals, the OT-
1000-HH transmitter is ideal for CATV Hybrid Fiber Coax (HFC) applications
and Fiber-to-the-Premise (FTTP) deployments using Active/Passive Optical
Network (AON/PON) architectures.
The Model OT-1000-HH transmitter utilizes a high-quality, DFB, low-chirp,
optically isolated DWDM laser that uses advanced predistortion, SBS and
pre-chirping technology to provide excellent signal quality. Often referred to
as a Direct Mod 1550 nm transmitter, the OT-1000-HH SuperMod transmit-
ter approaches External Modulator performance levels at distances from 0
to 20km at a substantially lower cost. The transmitter operates in the ITU-
grid wavelength with adjustable wavelength to ±100GHz when used with the
Network Controller. The Network Controller can control a wide range of
transmitter parameters.
The OT-1000-HH provides exterior RF and optical connections and test
points. These are the perfect companion to Olson Technology’s LaserLite
OTEA-CO, OTEB-CO and OTEA-CM series EDFA’s and the MetroNode
Model OTMN-x and PremiseNode Model OTPN-x product families, but is
also designed to operate seamlessly with optical receivers and/or nodes
from most leading manufacturers.
Electrical to optical conver-
sion of multichannel CATV
signals.
• Supports AM-VSB, FM, 8-VSB and
QAM CATV signals.
• Low noise SuperMod (DirectMod)
1550nm DFB Transmitter with pre-
distortion technology; DWDM vari-
ants available.
• Very high-quality transmission from
0-20km. Usable to 35km.
• Available RF bandwidth of 5-
1,000MHz for CATV digital multi-
channel transport.
• Downstream or upstream transmis-
sion in HFC networks.
• Optical output of +8dBm
• Advanced SBS suppression and
pre-chirping technology.
• Dual RF inputs: low and high level
inputs or optional narrowcast input
with high isolation.
• Preset or optional adjustment of
slope, gain, output power, OMI, pre-
chirping, etc.
• Automatic load control (ALC) for
constant OMI
totrms
.
• SC/APC optical connector; RS485
control interface.
• 1RU 19” EIA rack mount chassis.