Toner Cable DHDC-DH 6261 Digital & HDTV - Manual

Telephone: Nationwide: Fax: E-mail: Internet:
01/04
DHDP
Digital High Definition Pr
ocessor
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
DHDP Digital High Definition Processor
FEATURES:
! Brings Digital and HDTV
Programming to Existing
Systems
! Agile Off-Air Channel Inputs
and Outputs are Selected
by Simple Switches
! Superior Triple SAW
Filtering for Ultra-Clean
Adjacent Channel
Performance
! Encased in Advanced Die-
Cast Housing for
Compatibility with Standard
Blonder Tongue Micro-
Modular Racks & Power
Supplies
ORDERING INFORMATION:
Stock No.
Model Description
6261 DHDC-DH Digital & HDTV Downconverter for Horizontal Housing
6262 DHDC-UH Digital & HDTV Upconverter for Horizontal Housing
6264 DHDC-DV Digital & HDTV Downconverter for Vertical Housing
6265 DHDC-UV Digital & HDTV Upconverter for Vertical Housing
7710 MIRC-4C 4 Module Rack for Horizontal Application
(2 Channels, 1RU, Power Supply Included)
7715 MIRC-12V 12 Module Rack for Vertical Application
(6 Channels in 3RU)
7722C MIPS-12C Power Supply for Vertical Application
DHDP Series
Easily Deliver Digital & High
Definition Programming
Blonder Tongue’s Digital High Definition Processor (DHDP)
Series gives cable television operators the ability to easily
deliver digital & high definition programming from 8 VSB off-
air sources to customers over existing cable systems.
The DHDP series is a two-part system that receives any high definition or digi-
tal signal and processes it to any available 6 MHz channel in the 54-806 MHz
frequency range. The unit does not modify any of the data stream information
throughout the process guaranteeing compatibility with many consumer
decoders. Achieving the highest level of signal purity, the DHDP features triple
SAW filtering that results in extremely high adjacent channel rejection. Plus,
advanced AGC circuitry ensures consistent output signal fidelity. All modules are
housed in Blonder Tongue’s advanced die-cast micro housing and compatible
with standard micro-modulator racks & power supplies.
With DHDP Series Converters, an operator uses an off-air antenna to receive
the digital & high definition programming from local broadcast sources. These
signals, currently found in the UHF band, are transmitted in 8 Vestigial Side
Band (8 VSB) format. The 8 VSB signal is received by the DHDC-D, converted
to IF and then fed to the DHDC-U. The DHDC-U then upconverts the signal to
any available channel, including on-channel if desired, for distribution on the
existing cable system. The signal can then be viewed at the customers’ homes
with any HDTV-capable television or a standard television with an external
HDTV receiver.