Toner Cable HDE-8C-QAM MPEG-2 HD Encoder 8x Component_Composite >4x QAM - Manual (Page 2)

Specifications Subject To Change Without Notice Rev 11-13 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Specifications
INPUT
Component
Primary Connectors:
Spare Connectors:
Video Resolution:
Video Aspect Ratio:
8 sets each 3x RCA for Video (Y, Pb, Pr)
8 sets each 2x RCA for Analog Audio (L, R)
3x RCA for Video (Y, Pb, Pr)
2x RCA for Analog Audio (L, R)
480i, 720p, & 1080i
4:3 & 16:9
Composite Video
Primary Connectors:
Spare Connectors:
Video Resolution:
8 sets each 1x RCA for Video (Y)
8 sets each 2x RCA for Analog Audio (L,R)
(shared with component connectors)
1x RCA for Video (Y)
2x RCA for Analog Audio (L,R)
(shared with component connectors)
480i
EAS (Emergency Alert System)
Connectors:
Trigger Mechanism:
3x RCA (Video, Audio L & R)
5-12 VDC & Dry Contact Closure (Terminal Strip)
OUTPUT
QAM
Connector:
Modulation:
Standards:
DVB Symbol Rate:
Frequency Range:
Tuning:
Channel Bandwidth:
RF Level:
RF Level Adjustment Range:
Frequency Tolerance:
Frequency Stability:
Amplitude Flatness:
Phase Noise:
Spurious:
Broadband Noise:
Impedance:
Spectral Inversion:
Carrier Suppression:
Return Loss:
Signal-to-Noise Ratio (SNR) :
MER:
I/Q Phase Error:
I/Q Amplitude Imbalance:
1x “F” Female (rear panel; up to 4x RF QAM ch. combined)
QAM 16, 32, 64, 128, and 256
ITU-T J.83; Annex A and B
Variable; up to 7 MSymbol/sec (MBaud)
54 to 1002 MHz
CATV Channel Selectable (CH. 2 to 158)
24 MHz (4x Adjacent 6 MHz)
+40 dBmV ± 1 dB (4 channels combined)
+35 to +45 dBmV, 1 dB increment
± 0.5 kHz @ 77 °F (25 °C)
± 5 kHz over 32 to 122 °F (0 to 50 °C)
± 0.25 dB (over 6 MHz channel)
-98 dBc (@ 10 kHz)
-60 dBc
-70 dBc (@ +40 dBmV output level, 5.5 MHz bandwidth)
75 Ω
Auto Recognition
45 dB
14 dB typical
40 dB typical
39 dB typical
Less than 1 degree
Less than 1%
ASI
Connector:
Output Assignment:
Format:
Standard:
1x BNC (front-panel)
Any 1 of 4 QAM output streams
DVB-ASI
ETSI EN 50083-9
General
Dimensions (W x D x H) : 19.0 x 19.5 x 3.5 inches (483 x 495 x 89 mm)
Power: 110 - 230 VAC, 50/60 Hz (Fuse: 4.0A, 250 VDC, Slo Blo)
Power Dissipation: ~60 W (max)
Weight: ~15 lbs (6.8 kg)
Operating Temperature: 32 to 122 °F (0 to 50 °C)
Storage Temperature: -13 to 158 °F (-25 to 70 °C)
Operating Humidity: 0 to 95% RH @ 35 °C max, non-condensing
Storage Humidity: 0 to 95% RH @ 35 °C max, non-condensing
Alarms/Monitoring/Control
Local Monitoring:
Local Control:
16x Input Status LEDs (Video 1-8; Audio 1-8)
2x Spare LEDs (Video & Audio)
1x Power LED
1x “F” Female RF Test Port
1x IP Reset button
Remote Monitoring/Control: GUI-based menu via Web browser
(1x RJ45 connector; 10/100Base-T)
Encoding Profile
Video
Output Format:
Chroma:
Resolution:
Frame rate:
Aspect Ratio:
GOP Structure:
Transport Rate:
Video Bit Rate:
Video Pre-filter:
Audio
Output Format:
Sampling rate:
Bit rate:
MPEG-2 HD MP@ML; ISO 13818-2
4:2:0
480i, 720p, & 1080i
29.97 fps (480i); 29.97 fps (1080i); 59.97 fps (720p)
4:3 & 16:9
I & P frames (user-selectable)
Variable (user-selectable)
Variable (user-selectable)
Variable (user-selectable)
Dolby ® Digital
48 kHz
Variable; 128-320 Kbps (user-selectable)
Closed Captioning
Component:
Composite:
EIA- 608; 1x RCA (CC)
EIA-608
Stock # Description
HDE-8C-QAM 6370 MPEG-2 HD Encoder; 8xComponent +
8xComposite + 1xSpare inputs;
4xQAM + 1xASI outputs; EAS compatible
6371 OPTION-1 MPEG-2 HD Encoder for
DishNetwork’s ViP211k Satellite Receivers
Ordering Information
HDE-8C-QAM
MPEG-2 HD Encoder 8x Component/Composite ►4x QAM