Toner Cable OPAT-14 Power Agile Transmitter - Manual

Specifications Subject To Change Without Notice Rev 11-11 ©Toner Cable Equipment, Inc.
OPAT-14
Power Agile Transmitter
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The New Olson Technology Inc. OPAT-14 is a continuously adjustable fiber
optic transmitter that can be used for any power requirement from +3dBm to
+14dBm [2mW to 25mW]. This unique unit can be used as a replacement
for any transmitter that falls in this power range. Convenient front panel
metering is provided in both dBm and mW.
With the application of this unit there is no reason to be concerned about
future node splits as the output can be increased or decreased without tak-
ing the unit out of service.
Preliminary Specifications
• Input Frequency Range:
50MHz to 1000MHz
• Input RF Power:
+18dBmV, +/- 2dB
• Optical Output Power:
+3dBm to +14dBm
Continuously Adjustable
• Distortion Performance:
CSO >61dB, CTB >62dB
• Carrier to Noise:
>51dB typical
• Front Panel Meter Accuracy:
± 10% mW scale,
± 0.5dB dB scale
• DC Power Requirements:
+12 volts, 2.1mm x 5.5mm adaptor.
Wall supply included. 7 Watts max.
• Size:
5.5” x 1.6” x 7.5”
The unit can be conveniently rack mounted in the standard Olson OTLL-
RMKIT-1 triple rack mount panel above.
There is also an economy version available, the OPAT-10. This unit is con-
tinuously adjustable from +3dBm to +10dBm [2mW to 10mW].