Toner Cable OTOR-300 1310 - 1550nm Return Optical Receiver - Manual

OTOR-300
Standalone or 1RU Rackmount Return Optical Receiver
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The OLSON TECHNOLOGY INC. LaserLite Model OTOR-300 is a high quality, cost
effective CATV Return Path Receiver which utilizes a new low noise, impedance
matched, high efficiency 1310/1550nm broadband photodiode and advanced RF
amplification circuitry to facilitate carriage of critical downstream video, data, telephony
and internet traffic in an HFC broadband environment.
The unit is ideally suited for direct fiber reception of CATV RF signals in FTTC, FTTH,
MDU, industrial, corporate, government, educational or other I-Net applications where
a high performance, compact, standalone downstream receiver is required for desk-
top, shelf or wall-mounting.
The OTOR-300 is a rugged, self-contained device with external RF and optical con-
nections and test points and internal 90-240 VAC power supply. The field-configurable
SC/APC (or optional FC/APC) optical input connector can be mounted on the front-
panel or rear-panel of the unit. The unit is forced air cooled via an external high-MTBF
fan, which is designed to be field-replacable without interrupting operation.
The unit features a unique provision which allows the the OTOR-300 to perform as a
standalone downstream receiver -OR- as a rack mount return receiver with the addi-
tion of the Model# OTLL-RMKIT (optional). Up to (3) OTOR-300’s can be can be
mounted in a 1RU (1.75") 19" EIA space with each kit.
The OTOR-300 is the perfect companion to other models in the Olson Technology,
Inc. LaserLite and LaserPlus product families, but is also designed to mate with opti-
cal transmitters and receivers from most leading manufacturers. The OTOR-300 can
also be colocated with the Olson Model OTOT-1000-x Optical Transmitter to form the
headend side of a two-way “transceiver” configuration, when mated on the remote
subscriber end with the Olson Model OTPN-1000 indoor node or Olson Model OTMN-
II outdoor 4-port node.
Features
• Ultra Wide 5-300 MHz Passband
supports traditional 5-42/65MHz
Return or newer Return Multiplexer
topologies
• High Sensitivity, Wide Optical Input
Window (-14dBm to +3dBm) at
1310nm or 1550nm wavelengths
• Low Noise, High RF Output Level to
+45dBmV set via internal plug-in
attenuator pad
• Unsurpassed Return Path
Performance with High NPR of
>41dB and Wide Dynamic Range of
>15dB
• Unique, Self-Contained, Low-Profile,
Rugged Package designed for Low-
Density Standalone CATV applica-
tions
• Optional 19" EIA Rack Kit mounts
up to (3) OTOR-300’s on a 1RU
chassis panel for Higher-Density
applications
• Low Power Consumption; Runs
Cool; Integrated Universal 90-240
VAC Power Supply (24 VDC option)
• Very Cost Effective