Toner Cable EN-20 HD_SD Dual SDI MPEG2 Encoder with QAM Modulator - Manual

EN-20
HD / SD Dual SDI MPEG2 Encoder
with QAM Modulator
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The EN20 is a two-channel High and Standard definition
MPEG 2 distribution encoder supporting ATSC and DVB
QAM, ASI and IP distribution platforms.
It inherits Adtec’s broadcast qualit y compression,
advanced feature set, service performance and reliability
in the new dense two-channel platform targeted towards
broadcasters, cable and IP compression applications.
The device automatically detects video and audio from
two sources (combination of HD and SD acceptable),
encodes, multiplexes and send them back out as one
combined TS via IP, ASI or optional QAM. Closed caption-
ing and support for Emergency Alert (EAS) are standard.
Availability
EN20-01
Dual HD/SD MPEG 2 Encoder
EN20-01-QAM
Dual HD/SD MPEG 2 Encoderwith QAM Modulator
Features
• 2-Channel high definition encoding:
The EN-20 automatically detects two channels of
video and audio, encodes and multiplexes the signal
into a multiple program transport stream with either
DVB or ATSC table compliance.
• Optional QAM modulation and RF up-conver-
sion:
For cable television applications, the unit modulates
the signal using QAM Annex A and B and up-con-
verts two video and audio services multiplexed on
one carrier frequency for distribution via coax net-
works.
• Standard ASI and GigE output:
For non-RF applications, the EN-20 delivers ASI (75
Ohm source per EN500083-9) and GigE (MPEG2 or
optional RTP multicast transport egress).
• Program information:
The EN-20 is compliant with the ATSC A69 Program
and System Information Protocol (PSIP).
• Closed captioning and EAS:
Support for closed captioning and Emergency Alert
(EAS) is standard.
• Flexible configuration & control: Controlling and
configuring the EN-20 is easy using the integrated
front panel keypad and LCD and web page for con-
figuration and monitoring.