Toner Cable DSP806 806 MHz Agile PLL SAW-Filtered Digital Analog Channel Processor - Manual

Features
• ATSC (HDTV), QAM, and NTSC
compatibility for CATV and
terrestrial broadcast applications
provides maximum compatibility
for all signal processing
• High 45dBmV output for optimum
carrier-to-noise performance
• Microprocessor control enables digital push-button input
and output channel selection for ease of installation,
configuration, and servicing
• In-band carrier-to-noise ratio >65dB ensures superior picture quality.
• SAW filtered for superior adjacent channel performance enables drop-in channel
expansion
• Non-volatile memory for input and output channel recall in the event of power failure
• Front panel controls and test point enable easy setup and monitoring
• Double heterodyne conversion provides over 60dB spurious output and channel rejection for interference-
free adjacent channel operation
• Broadcast-quality specifications for unparalleled data translation
• IF loop provides compatibility with CMTS, QAM modulators and IF scramblers
• IRC and HRC input and output offset available for frequency settings in systems using offset channels
• Auxiliary AC outlet for convenience
Specifications Subject To Change Without Notice Rev 05-12 ©Toner Cable Equipment, Inc.
DSP806
HDTV Agile Channel Processor
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Input Bandwidth 54~806MHz
Input RF Level (analog) 10dBmV
Input AGC Range (analog) 0~25dBmV
Output Bandwidth 54~806MHz
RF Output (analog max) 55dBmV
RF Output (digital max) 40dBmV
Carrier to Noise (in-band) >60dB
Carrier to Noise (out of band) >68dB
Spurious Output >65dB
Output Frequency Stability ±5kHz
RF Input Connection 75 Ω F-Female
RF Output Connection 75 Ω F-Female
Voltage Input 110~120VAC
Power Output Receptacle Yes
Dimensions 19˝ (L) x 9˝ (D) x 1.75˝ (H)
Weight 7.9 lbs
Ordering Information
DSP806
HDTV Agile Channel Processor
Specifications
Front View Rear View