Toner Cable FOTCK Fiber Optic Test & Cleaning Kit - Manual

FOTCK
Fiber Optic Test & Cleaning Kit
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The FOTCK has been assembled to pro-
vide the technician responsible for the
installation of the fiber optic transmitters
and receivers in the system. The kit con-
tains an optical power source and optical
power meter to test the installed cable
and connectors optical loss. A viewable
light source is included to find damaged
fiber and jumpers. A microscope is
included to inspect connectors as is
cleaning materials to clean dirty connec-
tors, pigtails, jumpers and coupler fittings.
By testing and cleaning the installed fiber
cable, you can be sure to have the proper
signal levels and eliminate problems and
damaged equipment.
Kit Contains:
(1) Toner OLS1315 Optical Light Source
(1) Toner OPM1315 Optical Power Meter
(1)
Wilcom F6230A Visible Light Source
(1) Noyes OFS-300-200C Microscope
(2) FC/UPC to SC/APC 1 Meter Singlemode Fiber Jumpers
(2) SC/APC Mating Sleeves
(1) Cletop-S Connector Cleaner
(1) Microcare DST Canned Air
(1) Microcare FCC-II Fiber Connector Cleaner Fluid
(50) Microcare S25 Fiber Cleaning Swabs
(50) Microcare MCC-FA1 Single Use Wipes
(90) Microcare WFW “Lint Free” Wipes
(1) Rugged Custom Carrying Case
FOTCK is a tool kit specifically designed for the testing of installed fiber.
Specifications Subject To Change Without Notice Rev 06-13 © Toner Cable Equipment, Inc.