Toner Cable DTD-1000 Demodulator Input Module - Manual

DTD1000 Input Module
Input Frequency Range: 54 to 1000 MHz
Channel Plans (Menu selectable): Std. CATV, HRC, IRC, or
Broadcast
Input Channel Bandwidth: 6 MHz
Input RF Level Range: -33 dBmV to +35 dBmV, 8VSB
-22 dBmV to +35 dBmV, 64 QAM
-17 dBmV to +35 dBmV, 256QAM
Input Impedance: 75 Ohms
Input Return Loss: > 6 dB, Broadcast mode
>12 dB, CATV mode
Image rejection: 80 dB
Adjacent Channel Rejection: 40 dB
Noise Figure: < 9 dB, Broadcast mode
<12 dB, CATV mode
Demodulation Modes: 8VSB - ATSC
64QAM, 256QAM, - ITUB,
CATV mode
Symbol Rates: 10.76 MS/s, 8VSB
5.057MS/s, 64QAM
5.3606MS/s, 256 QAM
Specifications Subject To Change Without Notice Rev 07-12 ©Toner Cable Equipment, Inc.
The DTD1000 input module tunes any 8VSB or QAM
channel between 54 and 1002 MHz, making it ideal for
digital channel processing applications where a single digi-
tal video signal is received, error-corrected, clocked (at a
user determined fixed rate) and re-modulated on the same
or another RF channel.
The DTD1000 may be used to convert one off-air ATSC
8VSB signal to a QAM output with rate adjustment or,
when used in the processor mode with only one input, the
MEQ1000 can process ATSC or CATV QAM MPEG-2
inputs.
DTD-1000
Demodulator Input Module
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Specifications