Toner Cable 3.0 Meter Prime Focus Receive Only Antenna - Manual

3.0 Meter Prime Focus Receive Only Antenna
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Antenna Size - 3.0 Meter
Electrical Specifications C BAND KU-BAND
Operating Frequency (GHz) 3.625 – 4.2 10.95 – 12.75
Midband Gain, dBi (± .5dB) 40 dBi 49 dBi
3dB Beamwidth 1.7° 0.6°
Antenna Noise Temperature (20° Elevation) 30K 29K
Antenna Noise Temperature (30° Elevation) 28K 26K
Feed Interface CPR229F WR75
First Sidelobe (typical) -20 dB
Cross-Pol Isolation (Linear) >30 dB (on axis)
VSWR 1.3:1 Max.
Insertion Loss -30 dB
Mechanical Specifications
Reflector Material Eight Segment Glass Fiber
Reinforced Polyester SMC
Antenna Optics Prime Focus, Axisymmetric
Mast Pipe Size 6” SCH 80 Pipe (6.62” OD)
F/D Ratio / Feed Support .30 / Quad Feed Support
Elevation Adjustment Range 10° to 70° Continuous Fine Adjustment
(90° optional)
Azimuth Adjustment Range 360° Continuous / Polar mount
covers any 90° segment of arc
Declination Corrected Polar Range 90° arc coverage with 36” actuator
Environmental Specifications
Wind Load
Survival 125 mph (201 km/h)
Operational 45 mph (72 km/h)
Temperature
Operational -40° to 140°F (-40° to 60° C)
Survival -50° to 160°F (-46° to 71° C)
• 8 Piece Precision Compression
Molded Centerfed Reflector
• Low Transportation Cost with Eight
Panel Reflector
• Fixed Az/El or Polar Mount Options
P300FAE
P300PLR
Specifications Subject To Change Without Notice Rev 05-12 ©Toner Cable Equipment, Inc.