Toner Cable DTU Series RF Test Analyzers - Manual

Telephone: Nationwide: Fax: E-mail: Internet:
05/09
Sencor
e DTU Series RF
Test Anal
yz
er
s
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Portable RF Measurement & Analysis Systems for NTSC, QAM,
ASI, 8VSB, ATSC & COFDM Signals on your Laptop or PC
The Sencore DTU-series (ATSC/QAM/NTSC)
RF adapter is a lightweight and easy to use
portable RF measurement and analysis tool.
Tune any UHF/VHF or cable channel and
record MPEG-2 Transport Streams from the
RF or ASI connection directly to a laptop for
effortless field testing and recording. The
DTU-series RF adapter enables engineers
and technicians to take a snapshot of their RF
signal quality including RF level, MER, Pre-
BER and Post BER for quick troubleshooting
and RF analysis.
RFXpert Software Features
· True demodulated digital readings for MER, Pre-BER, Post BER, and EVM
· No calculated readings which can leave you wondering about the accuracy
of each measurement.
· A proof-positive method of signal documentation or drop-point comparisons
with programmable, user defined logging and auto-inspection capabilities.
· Simply set the parameters you want to test the signal against, and run
"Auto Inspect". You get a pass/fail report that can be stored for future ref-
erence or documentation.
StreamXpert Software Features
· Real-time analysis, monitoring and recording of MPEG-2 transport streams
· Complete diagnostics and statistics for PIDs, services, components and
tables
· Operates up to maximum effective DVB/ASI bit rate (214 Mbit/s)
· PCR analysis
· Deep decoding PSI and DVB/SI tables
· Decoding of custom tables and descriptor with custom templates
· Unique PID grid for an instant overview of the entire contents of the trans-
port stream
· Integrated MPEG-2 video and audio decoding with AC3 support
DTU Series RF Test Analyzers