Toner Cable RD60 Integrated Receiver _ Decoder - Manual

Specifications Subject To Change Without Notice Rev 12-11 ©Toner Cable Equipment, Inc.
RD60
Multi-CODEC IRD
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The RD60 is a multi-CODEC ultra-low, low and normal delay MPEG 2 and MPEG 4 AVC/H.264 high definition IRD. The ultra-low
delay mode requires the use of Adtec’s EN91 and delivers picture-to-picture services in 100 milliseconds; the low and normal delay
modes are supported by both the EN91 and EN81. The RD60 is interoperable with other encoders making it ideal for mission critical
trunking, ad-hock OB, DSNG and teleport applications.
The lightweight, 10 pound or 4.5 Kilo RD60 offers amazing features and specifications in its 1 RU chassis, including redundant AC
power supplies, enhanced control and monitoring via its front-panel, a browser and SNMP; video support includes SD, 2D-HD and 3D
AVC 422, sixteen channels of phase aligned audio, robust VBI support, reliability and ease of use all for an extraordinary value. In
addition to encoding phase aligned audio, the RD60 pass-through support includes PCM, DolbyE (16 and 20 Bit) and Dolby AC3 (2.0
and 5.1).
The RD60 RD IRD identifies services concurrently from ASI, IP and DVBS/S2 transport interfaces. The DVBS/S2 de-modulator sup-
ports modes ranging from QPSK up to 32APSK based on software licenses.
Power .......................................................................................................
Power:
1 & 2 Redundant AC Power, Standard 3 pin computer
power plug (Auto range 70-240 VAC Input)
Processor ................................................................................................
GigE:
MPEG2 or RTP multicast transport ingress port
Current Contraints: 10 - 30 Mbps
COM2: API Serial Communication Interface
COM1: Serial Port Used for Troubleshooting (Terminal)
Ethernet: 10/100 base T ethernet interface
(Monitoring/Management)
USB 2.0: Not Currently Supported
RS422: Not Currently Supported
Parport: 9-pin parallel I/O interface for control systems
GPIO: Tally and Control Port
Decoder.....................................................................................................
Analog Audio Out: Balanced analog audio out. Stereo pairs 1 & 2
AES Audio Out 1-4: 75 Ohm AES-3 BNC
ASI In:
75 Ohm BNC
DVB-ASI x3 Out: 75 Ohm BNC
SDI/DVB In: 75 Ohm terminated Input, Video & Audio SDI Supports
SMPTE 425M (Level A and Level B), SMPTE 424M,
SMPTE 292M BNC
Sync In: Standard analog video sync separation for NTSC, PAL,
480I/P, 576I/P, 720P, and 1080I/P/PsF from Composite
Video (CVBS). Bi-level & tri-level sync compatible.
BNC
CVBS Out: 75 Ohm Standard De finition Composite Video Output
BNC
HDMI Out: HDMI 1.3 compliant Output
SDI Out Banks: (2) 75 Ohm Outputs from decoder: Video/Audio/VBI
(SMPTE 259M-C - SD & SMPTE 292M - HD) BNC
Demodulator (optional)*..........................................................................
RF 1 & 2:
RF input, 75 Ohm F-Connector
Standard (STD) Model: Supports L-Band, DVB-S/S2, QPSK 1-30 Mbaud
& 8PSK 1-30 Mbaud
Premium(PRM) Model: Supports L-Band, DVB-S/S2, QPSK 256kbaud -
30 Mbaud, 8PSK 1 - 30 Mbaud.
* Software Key field upgradeable to 16APSK and
32 APSK.
Features
• Automatic SD and HD detection
• AVC 422 Video decoding
• Sixteen (16) channels of phase aligned audio encoding
• Time Code, Captions and other VBI support
• Redundant Power Supplies
• Front Panel, Web UI, SNMP control and monitoring
• DVBS/S2 demodulation
• Demodulation modes from QPSK to 32APSK
• ASI and IP Receiving (IP supports SMPTE 2022 FEC)
Applications
• DSNG (ultra-low, low and normal delay)
• Tier One Contribution
• 3D Discrete Contribution
• Fiber and IP Transport
• Ad-Hock services
• High Efficiency Trunking (JPEG replacement)