Toner Cable TIN40R-1000 2-Way Indoor Optical Node - Manual

TIN40R-1000
2-Way Indoor Optical Node
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
The TIN40R-1000 is a
two-way fiber optic node for CATV, SMATV, FTTx, MDU, or private
business applications. The TIN40R-1000 has a wide optical input bandwidth range from 1200 to
1600 nm making it ideal for either 1310 nm or 1550 nm systems. The fiber optic receiver has an
AGC circuit to maintain an RF output over a -8 to +4 dB optical input level. The high RF output
level of 40 dBmV eliminates the need for a separate RF amplifier for distribution. A 0-18dB gain
control makes system balancing easy without external pads. The GaAs E-pHEMT push-pull
hybrid provides superior performance with low distortions. With a 2 Mw DFV reverse band opti-
cal laser, the node is ideal for 2-way systems where reverse channels or modem data is present.
Using a 1550 nm laser allows for greater distances with lower optical loss for improved perfor-
mance. The node uses an external 12VDC power supply (included) which can be connected
directly or diplexed on the RF output cable for remote powering. the optical input is a SC/APC
connector and features a multicolor LED for input level reference. Also featured is an internal
LED display showing optical levels.
Features
• Full forward bandwidth up to 1 GHz
• 5-42 MHz reverse, 2 Mw DFB laser
• 1550 nm reverse optical wavelength
• High RF output range; 40 dBmV stable
within wide optical input range (-8 to +4
dBm) with AGC feature
• GaAs E-pHEMT push-pull technology for
high and stable output level with very low
power consumption
• Optical input test point
• LED display of optical levels
• External powering (11-35 Vdc) or remote
powering over coax line via power insert-
er
• Surge protection (6kV) at RF output
• SCTE compliant F type connectors
• Diecast aluminum housing for excellent
heat dissipation and RFI shielding