Toner Cable D'VersiBIT Drill Bit System - Manual (Page 2)

©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
Gr
eenlee D’V
er
siBIT
System
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
Bit Diameter Shaft Shaft Type M Type HS Type A Type B Type C
Length Diameter Masonry High Speed Auger Screw Point Combination
Steel
3/8” (9.5 mm) 36” (914 mm) 3/16” (4.8 mm) 3836D 06-03-36A 06-03-36B 06-03-36C
54” (1371 mm) 3/16” (4.8 mm) 06-03-54M
72” (1828 mm) 3/16” (4.8 mm) 3872D 06-03-72A 06-03-72B 06-03-72C
1/2” (12.7 mm) 36” (914 mm) 3/16” (4.8 mm) 1236D 08-03-36A 08-03-36B 08-06-32C
72” (1828 mm) 3/16” (4.8 mm) 1272D 08-03-72A 08-03-72B 08-03-72C
9/16” (14.3 mm) 36” (914 mm) 3/16” (4.8 mm) 09-03-36A 09-03-36B 09-03-36C
72” (1828 mm) 3/16” (4.8 mm) 09-03-72A 09-03-72B 09-03-72C
Extension Bits
Length Shaft Diameter Model
36” (914 mm) 3/16” (4.8 mm) 3XT36
72” (1828 mm) 3/16” (4.8 mm) 3XT72
Wire and Cable Pulling Grips
Cable Size Model
3/8” to 1/2” 125
1/2” to 9/16” 150
Abrasion Shield
To protect from abrasion and insulation wrap-
ping around bit shaft
Size Model
48” (1219 mm) 606AS
Ordering Information