Shindy Piston Ring Sets - Manual

PISTON RING INFORMATION
Silvered colored ring is for the top, and the second ring is black.
These rings both have a “T” stamped on one side to face the top.
To install the oil rings, first insert the spacer. Then, insert the side rails on top and under the
spacer. DO NOT allow the end grooves of the spacer to overlap.
To install the piston into the cylinder, be sure to adjust the angle of each ring gap, according to
OEM service manual directions.
**Use piston ring pliers when installing piston rings to avoid splitting the piston rings. The cast
iron piston rings will crack when overly stretched.
SHINDY PRODUCTS, INC.
1566 Centre pointe Dr., Milpitas, CA 95035