VANCO VPW-280709 (8X8) - Manual (Page 17)

www.vanco1.com
888.769.4156 17
CHECKING THE WORKING STATUS
Press “ENTER” button for 4 seconds, then the LED will show the working status one by one. Like this: switch
mode---Debug mode---IR status---DIP setting status. Then push the ‘ENTER’ button or wait for 3 seconds, the
unit will go back to normal working condition.
Switch mode: FAST SW (fast switch mode)/ NORM SW (normal switch mode).
Debug mode: DBG OFF (debug mode off) / DBG ON (debug mode on).
IR status: IR ON (the function of IR call back from remote locations to control the HDMI Matrix is on)/ IR OF
(the function of IR call back from remote locations to control the HDMI Matrix is off)
DIP setting status: D (dual UTP mode) / S (single UTP mode); FIX (fixed EDID)/ FULL CPY (full copy EDID) /
LIM CPY(limited TMDS clock copy EDID); H12 2CH (HDMI 1.2 stereo)/ H12 6CH (HDMI 1.2 6channel)/ H13
2CH(HDMI 1.3 stereo) / H13 6CH(HDMI 1.3 6channel)
Attention:
When the DIP switch is set to fixed EDID (1000---1111), the EDID COPY operation will fail. The LED will show
MIX FL.
Please insert or extract cables gently.
SPECIFICATIONS
Operating Temperature Range ..................................... -5 to +35°C (-41 to +95 °F)
Operating Humidity Range .......................................... 5 to 90 % RH (no condensation)
Input Video Signal ...................................................... 0.5-1.0 volts p-p
Input DDC Signal ........................................................ 5.0Volts/P-P
Supports HDMI Resolutions ........................................ 1080P/1080i/720P/576P/480P/576i/480i
Supports Audio Format............................................... DTS-HD Dolby true HD7.1 ch
Output Video ............................................................. HDMI+HDCP1.3
Maximum Transmission Distance ................................. 15m or 50 ft (If needed, HDMI extender is optional)
UTP cable Transmission Distance ................................ 50m or 164 ft (if longer distance is required, use
Vanco UTP extender)
Power Consumption ................................................... 40watts (Max.)
Dimensions ............................................................... 17.3’’W×7’’H×15.3’’D
Mass (Main unit) ....................................................... 3.75 KG or 9.25 lbs.