VANCO WM3665F User Manual
Page 4
-5-
.
Part 2a-Attaching Brackets To Screen With Flat Back
Center brackets vertically on back of screen. Select the small(A or B),
medium(C or D) or large(E) screws. Attach brackets to screen using four
selected screws and four square washers(I) at the top and bottom of each
bracket. Tighten screws firmly. Do not overtighten
Part 2a-Attaching Brackets To Screen With Flat Back
Square washer(I)
Small hole for
M4 screws
A-E
Medium hole for
M5 and M6 screws
Large hole for
M8 screws
I
UP
UP
-4-
Part 1b-Concrete Wall Mounting
.
Level wall plate(1) and use wall as a template to mark six holes. Drill six 3/8
(10mm) dia. holes 2 (50mm) deep. Insert six anchors(K) into holes and
secure wall plate with six long bolts(J) and six washers(L).Tighten screws
firmly. Do not overtighten
”
”
Part 1b-Concrete Wall Mounting
Concrete Wall
K
2 (
” 50mm)
Φ3/8 (10mm)
”
J
L
Bubble level