Connect and operate – VANCO 280442 (1x2) User Manual
Page 5
Advertising
www.vanco1.com
800-626-6445
5
CONNECT AND OPERATE
1. Connect the supplied VGA cable from the VGA source into the VGA input of the splitter.
2. Connect stereo audio cable from audio output of the source into the audio input of the splitter. The audio
cable is not supplied with the splitter
3. Connect VGA cables (typically male/male) from the displays into the VGA outputs of the splitter.
4. Connect stereo audio cable (typically male/male) from audio receiver into the audio output of the splitter.
5. Insert the DC side of 5v power supply into the splitter and then plug the AC side of the power supply into
the wall outlet.
Attention: Insert / Extract cable gently.
280442 - Front and Back
280444 - Front and Back
Advertising