Rough Country 1113 User Manual

Jeep jk rear coil angle shim kit

Advertising
background image

JEEP JK REAR COIL ANGLE SHIM KIT

Thank you for choosing Rough Country for your suspension needs.

In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as post installa-
tion checks must be known. Attempts to install this system without this knowledge and expertise may jeopardize the
integrity and/or operating safety of the vehicle.

PRODUCT USE INFORMATION

Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered.

If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-
ucts by calling 1-800-222-7023.

NOTICE TO DEALER AND VEHICLE OWNER

Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of
the windshield or on the vehicle’s dash. The decal should act as a constant reminder for whoever is operating the vehi-
cle of its unique handling characteristics. INSTALLING DEALER - it is your responsibility to install the warning decal and
forward these installation instructions on to the vehicle owner for review. These instructions should be kept in the vehicle
for its service.

This kit is intended to be used with 3.5”-6” kits to correct the rear coil angle.

92111300

Thank you for choosing Rough Country for your suspension needs.

Kit Contents:

Coil Spacer (2)

Advertising