Rough Country 864 - Manual

Nissan 04-11 Titan Upper Control Arm Kit
Thank you for choosing Rough Country for all your suspension needs.
Rough Country recommends a certified technician install the parts included. In addition to these instructions, profes-
sional knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to
install this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehi-
cle.
Please read instructions before beginning installation. Be sure you have all needed parts and know where they go. Also
please review the tool list and make sure you have the necessary tools to install the kit.
PRODUCT USE INFORMATION
As a general rule, the taller a vehicle is, the easier it will roll. We strongly recommend, because of rollover possibility, that
seat belts and shoulder harnesses should be worn at all times. Avoid situations where a side rollover may occur.
Generally, braking performance and capability are decreased when larger/heavier tires and wheels are used. Take this
into consideration while driving. Do not add, alter, or fabricate any factory or after-market parts to increase vehicle height
over the intended height of the Rough Country product purchased. Mixing component brands is not recommended.
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered.
We will be happy to answer any questions concerning the design, function, and correct use of our products.
This kit in intended for use with lifted Nissan application, in particular 2” and above to allow additional upper
control arm movement and clearance between the upper strut tower and the control arm.
NOTICE TO DEALER AND VEHICLE OWNER
Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of
the windshield or on the vehicle’s dash. The decal should act as a constant reminder for whoever is operating the vehi-
cle of its unique handling characteristics.
INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on
to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.
Tools Needed:
19 mm Socket
13/16” Socket
22 mm Socket
Hammer
19 mm Wrench
Grinder
9286400
Kit Contents:
1-Driver Side Control Arm
1-Pass Side Control Arm