Rough Country 1064 - Manual

WJ WINCH MOUNT KIT
Thank you for choosing Rough Country for all your Off Road needs.
Rough Country recommends a certified technician install this winch plate. In addition to these instructions, professional
knowledge of disassemble/reassembly procedures as well as post installation checks must be known.
Please read instructions before beginning installation. Check the kit hardware against the kit content list. Be sure you
have all needed parts and know where they go. Also please review tools needed list and make sure you have the nec-
essary tools to install this kit.
With the addition of a winch and winch plate and due to multiple coil rates available for this model; The front of the vehi-
cle may require an additional 3/4” of lift to level the vehicle. For this purpose; Rough Country offers a 3/4” front spacer,
Part # 1060.
92106400
Tools Needed:
• 3/8” Socket
• 18mm Socket / Wrench
• Tape Measure
• 3/4” Socket
• Pliers
• 9/16” Drill Bit
• Drill Motor.
• Marker
• Saw
Kit Contents:
1064 Containing:
1-Driver Side Brace
1-Pass Side Brace
1-Driver Side Frame Bracket
1-Pass Side Frame Bracket
1-Winch Plate
1064Bag2 Containing:
12-1/2” X 1 1/2” Bolts
12-1/2” Flat Washers
6-Plastic Retainers
Optional D-ring Kit Available #1169