Rough Country RC604 - Manual

JEEP JK MANUAL SHIFT 1 1/4” 2 / 4 DOOR BODY LIFT
92RC60300
2DR & 4DR BODY MOUNT LOCATIONS
4DR MODELS WILL
HAVE 12 MOUNTING
POINTS
TOOLS NEEDED:
• 18mm Wrench
• 16mm Wrench
• 3/4” Wrench
• 9/16” Wrench
• Phillips Screw Driver
• Jack Stands
• Wood Block
• Hammer
Thank you for choosing Rough Country for your Jeep JK needs.
Rough Country recommends a certified technician installs this system. In addition to these instructions, professional
knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install
this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read all the instructions before beginning the installation. Check the kit hardware against the parts list. Be sure
you have all the needed parts and understand where they go. Also please review the tools needed list and make sure
you have needed tools.
KIT CONTENTS:
RC603:
12- RC Body Blocks (4 DOOR KIT)
1-Manual Shifter Adapter
Rear Bumper Brackets
1—Kit Bag Containing
24—3/8” x 2 1/4” Bolts
24—3/8” Nuts
48—3/8” Washers
1-8MM X 20MM Allen Head Bolt
1-1/4” x 3/8” Set Screw
RC604:
10- RC Body Blocks (2 DOOR KIT)
1-Manual Shifter Adapter
Rear Bumper Brackets
1—Kit Bag Containing
20—3/8”X 2 1/4” Bolts
20—3/8” Nuts
40—3/8” Washers
Rear Bumper Brackets
1-8MM X 20MM Allen Head Bolt
1-1/4” x 3/8” Set Screw
• T45 Torque Bit
• 1/8” Allen Wrench
• 8mm Allen Wrench
• Thread Locker