Rough Country 1047 User Manual

Jeep jk front bumper caps

Advertising
background image

JEEP JK FRONT BUMPER CAPS

Thank you for choosing Rough Country for your suspension needs.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional
knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install
this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.

Please read instructions before beginning installation. Be sure you have all needed parts and know where they go.
Please review tools needed list and make sure you have needed tools.

PRODUCT USE INFORMATION

If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-
ucts by calling 1-800-222-7023.




















INSTALLATION INSTRUCTIONS

1. Park the vehicle on a level surface.
2. Measure over 3 1/2” as shown on the bumper and mark with tape as shown. See Photo 1 & 2.

92104700

Tools Needed:

Reciprocating Saw

Tape Measure

Drill

1/4” drill bit

Masking Tape

Phillips Screw-driver

Kit Contents:

Dr Side Bumper Cap

Pass Side Bumper Cap

1-Poly Bag Containing:

10-Black Pins

PHOTO 1

PHOTO 2

3 1/2”

3 1/2”

Advertising