Rough Country 75138-15 - Manual (Page 9)

PowerBoard ® – Installation Instructions
Rev. Q 0713 75138 / 75143 pg. 9
The trigger wires
are color coded to
match the Door Ajar
wires. Use the Posi-
Taps™ to splice the
trigger wires into the
matching Door Ajar
wires.
Posi-Tap™ Instructions
Insert Tighten
Strip 3/8" Insert and
Tighten
Posi-Taps™
Trigger
Wires
2009 – 2012 RAM 1500
2010 – Current RAM 2500/3500
Splice Trigger Wires into
Door Ajar Wires
Replace the connector removed in Step 16. Replace
the wire bundles and fuse box.
Reconnect Fuse Box
Route the long leg of the Wire Harness across the
engine compartment to the passenger side wheel
well. Route the short leg to the driver’s side. Secure
them with 7" Cable Ties.
Route Wiring Harness
On the driver’s side route the Wire Harness down
along the underside of the fl oor and the frame.
Secure it with 7" Cable Ties.
Route Wiring Harness –
Driver’s Side
Wire
Harness
Wire
Harness
Continue to route the Wire Harness along the inside
and top of the driver’s side frame. Secure it with 7"
Cable Ties.
Route Wiring Harness –
Driver’s Side
Wire
Harness
7" Cable
Tie
7" Cable
Tie