Rough Country 1402 User Manual
Page 2
Figure 4
Figure 5
Figure 6
8.
Tighten bolts using a 18mm socket and wrench.
9.
Repeat on the opposite side.
10. Reinstall the front tires/wheels. Using a 7/8
”
deep well socket.
11. Remove the jack stands and lower vehicle to the ground.
12. Re torque fasteners after 500 miles. Visually inspect components and re torque fasteners during routine
vehicle service.
Figure 7
Maintenance Information
It is the ultimate buyers responsibility to have all bolts/nuts checked for tightness after the first 500 miles and
then every 1000 miles. Wheel alignment steering system, suspension and driveline systems must be inspected
by a qualified professional mechanic at least every 3000 miles
Product Information
Often the use of dual shocks is combined with the use of dual stabilizers when bigger tires and wheels are in-
stalled to eliminate steering drift.