Banks Power Dodge Trucks: (Diesel ’98 - 02 5.9L Cummins ISB) Tuner- Big Hoss Diesel Tuner (does not connect to pump wire) - Manual (Page 12)

12
96766 v.8.0
BOOST MODIFIER
INSTALLATION
16.
Find the actuator boost reference
hose and locate the brass fitting on
the compressor housing. See Figure 7.
17.
Remove the hose clamp and
detach the hose from the brass fitting.
Save the clamp for re-installation.
18.
Unscrew and remove the brass
fitting. Install the supplied “boost
modifier” in its place. Re-attach the
actuator boost reference hose and
securely clamp the hose with the
original clamp.
Note: do not over tighten the fitting or
damage to the threads might occur.
Figure 7