Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Programmer- Ottomind Programmer '99-07 Chevy-GMC 4.8L, 5.3L, 6.0L, 8.1L Trucks '01-07 Chevy-GMC 8.1L WorkHorse Class A Motor Home - Manual (Page 3)

Follow the vehicle preparation steps
to ensure a complete program
installation. These steps must be
performed prior to installing the Banks
OttoMind program.
Warning
• Failure to follow proper
instructions can result in a
damaged or disabled ECM (Engine
Control Module).
• Do not perform any operations
on Banks OttoMind while vehicle
is running. The vehicle must be
parked and engine OFF.
Precautions for Tuner Flashing
The vehicles Batteries must be fully
charged and in good condition before
using the Banks OttoMind.
Note: Always turn off all auxiliary vehicle
systems or functions that might come
active while the key in the vehicle is in
the “ON” position. Locate the fuse box
and remove the fuses for the fuel pump
cooling fans and all auxiliary systems or
functions. Auxiliary systems/functions
draw power from the battery and can
cause the download/upload process to
take longer or freeze the process if the
battery charge is to low.
Section 1
PreParing Vehicle For Banks ottoMinD PrograMMing
Figure 1: Display and Keypad Description
ESc (EScAPE):
Scroll menu back to
previous page
Arrow LEFT:
Scroll menu to the
left
ARROW DOWN:
Scroll down the
menu
ARROW UP:
Scroll up the menu
ENT (ENTER):
Select parameter
highlighted in menu
Arrow RIGHT:
Scroll menu right
(use this key to view
entire descriptions)
96343 v.6.0
3