Danze DF012130 - Installation Manual - Manual (Page 5)

7 8
14. Install the knobs (H) on the doors with the
bolts (I) using a Phillips screwdriver.
15. If needed, door hinges can be adjusted for
height and depth by loosening the hinge screws
on the inside and positioning them to the appro-
priate location.
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
10. Set the vanity (A) back to the intended posi-
tion, aligning holes with anchor positions.
11. Install the wall anchor hardware with a Phillips
screwdriver in the following order: flat washer
(S), plastic washer (D), spring washer (E), wood
screw (F), and metal cap (G).
12. Install the Orrington™ lavatory according
to the installation instructions provided with the
lavatory. The top of your Orrington™ vanity (A)
features a channel custom fit for your lavatory to
provide a solid seal and clean, straight lines.
13. Reinstall the interior trays onto the vanity (A).