Apple Wireless Keyboard (2007) User Manual
Page 3
English
3
Step 1:
Install the Batteries
Follow the instructions below to install batteries in your Apple Wireless Keyboard.
To install batteries in the keyboard:
1
Use a coin to remove the battery compartment cover.
2
Slide the batteries into the battery compartment as shown below.
3
Replace the battery compartment cover and leave the keyboard turned off until you
start up your Mac in Step 3.
Note:
When the Power On light is off, the keyboard is off.
Step 2:
Set Up Your Mac
Follow the instructions in the user’s guide that came with your Mac to set it up.
Because you have a wireless keyboard, skip the instructions to connect a USB keyboard.
Wait to start up your Mac until instructed to do so in Step 3.
Battery compartment cover
Insert batteries
1E4319.book Page 3 Tuesday, August 7, 2007 2:58 PM