Danze D502157T - Spec Sheets - Manual

SD502157T/06-13.01 Danze, Inc., 2500 Internationale Parkway, Woodridge, IL 60517, USA danze.com
Contractor: Contact #:
Job Name: Location:
Submittal Information:
7T 5 1 2 0 5 D 7T 5 1 2 0 5 D
SPECIFICATIONS
Warranty
Danze products are covered by a manufacturer’s
limited "lifetime" warranty for manufacturing defects.
Description
• Single handle w/4" bell showerhead
• Cast slip-fit spout
• Diverter on valve (Tub & Shower only)
• Back to back installation capabilities
• Chrome
• Other:Refer to Price List
for additional finish
With Diverter & Stops:
D 502157 (Tub/Shower)
With Stops:
D 502757 (Shower only)
Finishes Available
Model
D502157
Standards
• UPC/cUPC
• Energy policy act of 1992
• ADA Accessibility Guidelines for
Buildings and Facilities -
4.27.4 Controls and Mechanisms
• ASME A112.18.1
• ASSE 1016
Flow Rate
20 40 60 80
3
5
7
9
1
Trim Kits :
(for use w/pressure balance valves)
D502157T (Tub/Shower trim)
D502757T (Shower only trim)
D500657T (Tub trim w/valve escutcheon)
D500457T (Valve only escutcheon trim w/diverter)
D510457T (Valve only escutcheon trim w/o diverter)
Special Packaging
• This product also available with valve
packaged separate from trim.
• Tub & Shower and Valve Only Escutcheon
w/Diverter Trim Kit - use w/valve:
D113000BT (w/diverter & stops)
• Shower Only & Tub & Valve Only Escutcheon
w/o Diverter Trim Kit - use w/valve:
D112000BT (w/stops) or D115000BT (w/o stops)
• Pressure Balance Valves are combination
1/2" copper sweat, 1/2" NPT threaded
connectors for all ports.
OPULENCE™ SINGLE HANDLE PRESSURE BALANCE TUB & SHOWER TRIM KIT OPULENCE™ SINGLE HANDLE PRESSURE BALANCE TUB & SHOWER TRIM KIT
ASSE
1016
ш7 3/16"
(ш182mm)
5 1/2"
(138mm)
33"
( 838
mm)
65"-78"
1/2"-14NPT
(1651mm-1981mm)
ø5/8" (16mm)
1 3/8"-2 1/2"
(35mm-64mm)
1 5/8"-1 3/4"
(41mm-45mm)
20"
(508mm)
4 3/8" (11
1mm)
GPM
PSI