Grain Systems Bin Accessories PNEG-1652 - Manual (Page 11)

PNEG-1652 Reinforced Inside Ladder Instructions 11
3. Inside Ladder Instructions
2.66'' Commercial Stiffened
Figure 3A Outside Stiffened
NOTE: Be sure to push ladder sections up and tighten. Do not tighten ladder section splices with ladder
sections hanging under their own weight.
Now all standoff brackets and straps must be installed every 32" and attached to each 4' section required.
Figure 3B Un-Assembled Reinforcing Strap Figure 3C Assembled Reinforcing Strap