RAM Mount RAM-VB-127-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Across Transmission hump
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket/Bench
Construction/Finish
Steel/Black Powdercoat
Dimensions
A = 26.31", B = 10", C = 4.5”
Hole Center = 23.75" and 24.25"
Pole or Pedestal
Purchased Separately
Weight
5.5 lbs.
Features
Shown In Use
Misc.
Installs in minutes with no drilling required
Rugged steel construction
Lifetime warranty
Drilling may be required for vehicles with a bench seat
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-127
RAM-VB-127
DODGE RAM 1500 (1994-2001)
DODGE RAM 2500/3500 (1994-2002)