RAM Mount RAM-VB-107-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
Vehicle base for the
SPECIFICATIONS
Placement
Across transmission hump
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket/60-40 split
Construction/Finish
Steel/Black Powdercoat
Pole or Pedestal
Ordered Separately
Weight
7.3 lbs.
Dimensions
A = 8.75", B = 5", C = 5.75", D = 9.25”
Notes
Central mounting location moves pole away from passenger leg
space. There base is formed from one piece of steel. Drilling
may be required on vehicles with 60-40 split seats.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-107 & RAM-VB-107-SW1
CHEVROLET CAPRICE (1990-1995)
FORD CROWN VICTORIA/POLICE INTERCEPTOR (1991-2011)
National Products, Inc.
Website: www.ram-mount.com
Email: [email protected]
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
National Products, Inc.
Website: www.ram-mount.com
Email: [email protected]
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
Complete Vehicle Mount
RAM-VB-107-SW1
Vehicle Base
RAM-VB-107
Vehicle base for the
INSTALLATION INSTRUCTIONS
1. Place both front seats in their most rear position.
2. Remove the drivers side front right and the passenger side front left seat mounting bolts (inner seat bolts).
3. Slightly lift both the passenger and driver seats and slide the No-Drill™ base between the floor of the vehicle and the
bottom of the seat.
4. Align the holes and reinstall all of the seat bolts that have been removed.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-107 & RAM-VB-107-SW1
INNER SEAT MOUNTING BOLTS
CHEVROLET CAPRICE (1990-1995)
FORD CROWN VICTORIA/POLICE INTERCEPTOR (1991-2011)