RAM Mount RAM-VB-146-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement: Passenger side front of the seat
between the seat cushion and seat
frame/track.
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
Hole Center = 10.625” min to 15.875” max
A = 17.625", B = 13”, C = 5.25", D = 3.5”
Pole or Pedestal
Sold Separately
Weight 8.2 lbs.
RAM ADJUST-A-POLE
TM
Included With Base
Features
Shown In Use
RAM-VB-146
Misc.
Installs in minutes with no drilling required
The RAM-VB-146 base will not fit the Dodge Caravan with Power Seats.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-146
BUICK TERRAZA
DODGE GRAND CARAVAN (1996-2007)
CHEVROLET UPLANDER (2005-2007)
SATURN RELAY (2005-2007)
PONTIAC MONTANA SV6 (2005-2006) (2005-2007)