RAM Mount RAM-VB-106R4-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 8410 Dallas Ave S
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Buick Rendezvous: Passenger side on the
floor, under the seat
Dodge Sprinter: Between seat tracks and
seat frame box on passenger side(will limit
seat travel).
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Pole or Pedestal
Purchased Separately
Notes
Shown In Use
For Dodge Sprinter
Shown In Use
For Buick Rendezvous
Slotted hole design makes this base fit a wide
variety of vehicles. This base will not interfere
with factory installed console in most installations.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-106R4
RAM-VB-106R4
For Dodge Sprinter
RAM-VB-106R4
For Buick Rendezvous
DODGE SPRINTER VAN (2003-2006)
BUICK RENDEZVOUS (2004-2007)