RAM Mount Extension Pole with Sockets - Manual

PARTS INDEX:
A. TAB-TITE™ SPRING TRAY (QTY. 1)
B. TAB-TITE™ END CUP (QTY. 2)
(CUPS MAY VERY DEPENDING ON TAB-TITE™ VERSION)
C. #4 X 3/8” SHEET METAL SCREW (QTY. 10)
D. RAM MOUNTING HARDWARE PACK (QTY. 1)
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
ALIGN (B) END CUPS WITH HOLES ON EACH
END OF (A) SPRING TRAY. SECURE CUPS TO
SPRING TRAY USING (C) SCREWS.
DO NOT OVER-TIGHTEN SCREWS
A
B
C
D
RMR-INS-AC
RAM TAB-TITE™ ASSEMBLY INSTRUCTIONS
USE MOUNTING SCREWS AND NUTS
PROVIDED IN (D) HARDWARE PACK
TO ATTACH TAB-TITE™ TO YOUR
RAM MOUNTING SYSTEM. USE
APPROPRIATE LENGTH SCREW FOR
YOUR MOUNTING SYSTEM.
PARTS INDEX:
A. TAB-TITE™ SPRING TRAY (QTY. 1)
B. TAB-TITE™ END CUP (QTY. 2)
(CUPS MAY VERY DEPENDING ON TAB-TITE™ VERSION)
C. #4 X 3/8” SHEET METAL SCREW (QTY. 10)
D. RAM MOUNTING HARDWARE PACK (QTY. 1)
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.ram-mount.com
ALIGN (B) END CUPS WITH HOLES ON EACH
END OF (A) SPRING TRAY. SECURE CUPS TO
SPRING TRAY USING (C) SCREWS.
DO NOT OVER-TIGHTEN SCREWS
A
B
C
D
RMR-INS-AC
USE MOUNTING SCREWS AND NUTS
PROVIDED IN (D) HARDWARE PACK
TO ATTACH TAB-TITE™ TO YOUR
RAM MOUNTING SYSTEM. USE
APPROPRIATE LENGTH SCREW FOR
YOUR MOUNTING SYSTEM.
PARTS INDEX:
A. BLACK PVC PIPE (QTY. 1)
(PIPE LENGTH MAY VARY)
B. PIPE CAP WITH OCTAGON BUTTON (QTY. 2)
C. SINGLE SOCKET ARM FOR 1” BALL (QTY. 1)
D. SINGLE SOCKET ARM FOR 1.5” BALL (QTY. 1)
1. PRESS FIT (B) PIPE CAPS TO EACH END OF (A) PIPE.
PVC CEMENT MAY BE USED IF DESIRED. 2. DISASSEMBLE (C) 1” SOCKET ARM AS SHOWN.
KEEP WASHERS IN THEIR POSITION
4. REPEAT STEPS 2 AND 3 FOR (D) 1.5” SOCKET
ARM, ONTO OPPOSITE (B) PIPE CAP. 3. PLACE OCTAGON BUTTON FROM (B) PIPE CAP OVER (C) SOCKET ARM
HALF. REASSEMBLE SOCKET ARM ONTO OCTAGON BUTTON.
PARTS INDEX:
A. BLACK PVC PIPE (QTY. 1)
PIPE LENGTH MAY VARY
B. PIPE CAP WITH 1” BALL (QTY. 2)
PRESS FIT (B) PIPE CAPS TO EACH END OF (A) PIPE. PVC CEMENT MAY BE USED IF DESIRED
THIS EXTENSION PIPE IS INTENDED FOR CALM ENVIRONMENTS. EXTRA STABILIZATION MAY
BE REQUIRED WHEN MOUNTED TO ANY VEHICLE TO PROTECT AGAINST VIBRATION. SAFETY
TETHER IS RECOMMENDED WHEN NECESSARY.
THIS EXTENSION PIPE IS INTENDED FOR CALM ENVIRONMENTS. EXTRA STABILIZATION AND PVC CEMENT MAY BE REQUIRED
WHEN MOUNTED TO ANY VEHICLE TO PROTECT AGAINST VIBRATION. SAFETY TETHER IS RECOMMENDED WHEN NECESSARY.
(D) SOCKET ARM CLAMPS TO ANY 1.5” BALL BASE, AND (C) SOCKET ARM CLAMPS TO ANY RAM 1” BALL ADAPTER OR RAM EXTENSION PIPE.
RAM EXTENSION POLE WITH SOCKETS
ASSEMBLY INSTRUCTIONS
RPR-INS-CB-201
B
C
D
B
A
C B
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
A
PARTS INDEX:
A. BLACK PVC PIPE (QTY. 1)
(PIPE LENGTH MAY VARY)
B. PIPE CAP WITH OCTAGON BUTTON (QTY. 2)
C. SINGLE SOCKET ARM FOR 1” BALL (QTY. 1)
D. SINGLE SOCKET ARM FOR 1.5” BALL (QTY. 1)
1. PRESS FIT (B) PIPE CAPS TO EACH END OF (A) PIPE.
PVC CEMENT MAY BE USED IF DESIRED. 2. DISASSEMBLE (C) 1” SOCKET ARM AS SHOWN.
KEEP WASHERS IN THEIR POSITION
4. REPEAT STEPS 2 AND 3 FOR (D) 1.5” SOCKET
ARM, ONTO OPPOSITE (B) PIPE CAP. 3. PLACE OCTAGON BUTTON FROM (B) PIPE CAP OVER (C) SOCKET ARM
HALF. REASSEMBLE SOCKET ARM ONTO OCTAGON BUTTON.
THIS EXTENSION PIPE IS INTENDED FOR CALM ENVIRONMENTS. EXTRA STABILIZATION AND PVC CEMENT MAY BE REQUIRED
WHEN MOUNTED TO ANY VEHICLE TO PROTECT AGAINST VIBRATION. SAFETY TETHER IS RECOMMENDED WHEN NECESSARY.
(D) SOCKET ARM CLAMPS TO ANY 1.5” BALL BASE, AND (C) SOCKET ARM CLAMPS TO ANY RAM 1” BALL ADAPTER OR RAM EXTENSION PIPE.
RAM EXTENSION POLE WITH SOCKETS
ASSEMBLY INSTRUCTIONS
RPR-INS-CB-201
B
C
D
B
A
C B