RAM Mount RAM-VB-156-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side near floor using seat frame
as anchor.
Drilling Required
No - uses existing vehicle hardware
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Pole or Pedestal
Purchased Separately
Weight
4.5 lbs.
Dimensions
A = 19.875", B = 7.25", C = 2.125"
Hole Center = 17" and 18.25"
Features
Shown In Use
RAM-VB-156
Misc.
Installs in minutes with no drilling required
Won’t interfere with passenger leg space
Rock solid construction
Lifetime warranty
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-156
HYUNDAI AZERA (2006-2009)
HYUNDAI ELANTRA (2005-2011)
HYUNDAI SONATA (2005-2009)
KIA OPTIMA (2005-2009)